These pogies are clutch when you’re paddling in frigid conditions, literally. The NRS Clutch Pogies combine our thickest neoprene construction to maximize thermal insulation with the classic bare-hand design to enhance paddle control.

Updated for 2023! Our most popular flatwater blade paired with our patented corrosion-free ferrule makes for a winning combination.

Infinity 3-D End Floats give you the water displacement you’ll need under most conditions. Combine them with center floats and you’ll be ready for big-water tandem paddling. Fits most canoes except those equipped with factory flotation chambers.

Delta 10 Cockpit Covers are waterproof and feature an adjustable bungee cord that helps to hold firmly to your cockpit coaming. A pull tab/safety strap with a fastening clip is located on the front of the cover to help pull the cockpit cover off and also secure it to your deck while driving.

Utilized in a wide variety of situations, tie down straps are used primarily to hold your boat to the roof of your vehicle.

PT-440 (Yellow) With a universal fit for all QR-belts, the Salus Pig Tail extends from 26 to 44 inches. The tow system is fitted with a 2” stainless steel O-ring at one end, high visibility yellow bungee nylon webbing and the Kong wire-gate paddle carabineer at the other end.

The Cockpit Cover is constructed with heavy-duty, waterproof PFAS free TPU coated nylon, built to last and has superior tear resistance and UV protection. The bungee cord is encased in GripTex fabric for better rim grip, and the seams are fully taped to make a watertight seal on various cockpits.

Features:

• PFAS Free TPU Coated nylon
• Adjustable bungee
• GripTex bungee sleeve
• 100% PFAS FREE
• Bungee Deck Clip / Tether Hook on Handle

Fiberglass End Caps Small Pair Grey

Description

Removes fine scratches, haziness and abrasions from most plastics. With repeated use, NOVUS No. 2 restores faded and discolored plastics.

• Removes the damage instead of filling it in
• Buffs out quickly
• After restoring, seals with a coat of polish

Observe condition of the surface to be treated. The deeper the scratches, the greater the pressure required to remove them. If the surface is dirty, clean with NOVUS No.1 before applying NOVUS No. 2.

Shake well. Test in an inconspicuous area.

Apply NOVUS No. 2 liberally. Using a clean, soft cloth, polish with a firm back-and-forth motion at right angles to the scratches. Keep the cloth saturated with polish at all times.

When the worst scratches have been polished out, reapply NOVUS No.2 uniformly in a circular motion to the entire surface using short, circular strokes and light pressure. Allow to dry to a light haze.

Using a clean portion of the cloth, buff the surface to a slippery glaze using firm, short strokes. This procedure is imperative in achieving the best results.

For heavy scratches, multiple applications of NOVUS No. 2 or application of NOVUS No. 3 may be required.

Follow with NOVUS No. 1 for best results.

Emits effortless, authoritative sound that can be heard for miles over ambient noise. Designed for outdoor use (because it’s deafening if used indoors) and is great for personal safety or for search and rescue work.

• Made of polycarbonate with co-moulded elastomer for slip resistance
• Pealess design with two chambers and four resonators
• Waterproof, with no moving parts to freeze or jam
• Includes a breakaway lanyard
• Produces 120 dB of loudness

All kayak models in our Performance Touring category come with the option of our Spring Loaded Skeg System. Our skeg system is simple to deploy and features a kink-free operation. The skeg line is housed in a tube and tucked away under-deck so it reduces the chance of snagging when loading and unloading gear. As a note, a skeg can be deployed at different increments so the paddler can determine the amount of aid in tracking needed. A skeg does not move side to side so it will not aid in steering the boat. If you would like a steering aid, you can request a rudder as an option.

Grip: 3 ply laminated basswood, pear shape

Shaft: 3 ply laminated basswood and white cedar, oval 1 ¹⁄₈” x 1 ¹⁄₁₆”

Blade: 7 ply laminated cedar with a 4oz fibreglass cloth overlay

Blade Cross Section Style: cambered

Tip Material & Style: casting epoxy, complete edge

Finish: high gloss exterior polyurethane with UV block

All Kahuna Bomber series models are hand shaped EPS foam blanks that are wrapped with an ABS outershell producing a very strong & durable board that can handle rough use.

Reinforced ash motor mount, clamps to gunwales with easy to use phenolic knobs and stainless hardware.

The DownLoader™ Kayak Rack is our premium all-in-one kit to store your kayak vertically. Making frequent trips with your kayak is easy with the fold-down carrier frame that lays flat on the roof when not in use. Load your kayak with the help of the built-in loading ramps and once strapped in secure it with the included load straps and tie-downs. Universal JAWZ™ mounting hardware makes this a versatile kayak carrier to fit a wide range of aftermarket load bars (round, square and oval) as well as most factory cross-bar systems.

The 24″ Kayak/SUP Foam Block can be purchased as a single replacement or, in multiples, for the “do it yourself” paddler that is creating their own set-up. Sold in singles. Note: Safe kayak or SUP transport requires two blocks.

This inflatable roof rack lets you transport a kayak, SUP, ladder, or other equipment on your vehicle’s roof. Puncture-resistant air tubes create a protective cushion of air between the roof and your load. Storage tote and pump included. Easily mounts to the vehicle’s roof in a matter of minutes.

Specifications:

• Weight: 6 lb
• Length: 37″
• Width: 9″
• Height: 4″
• Load capacity: 180 lb

What’s In The Box:

• (1) Tote Bag
• (1) Pump
• (2) HandiRack Inflatable Carriers with Attachment Strap
• (2) Cam Buckle Load Straps
• (2) Bow and Stern Lines
• (1) Instruction Manual

The Maelström SUP paddle is sturdy, adjustable and light, offering great value to paddlers just starting out. The 2-piece design simplifies transportation and storage, and the push button mechanism allows for rapid height adjustments. This paddle board paddle has durable polypropylene square-tipped blades to give you smooth traction in the water.

Made for towing other kayaks this waist belt tow system can help your paddling partner reach their final destation. A great safety system to delpoy when you have fatigured paddlers who need help. This item features an expandable bag, quick-release belt, and shock leash system. The 5-meter dynamic rope with 24% elongation and a breaking strength of 320KG makes this the Tow Line an economical option for on water rescue scenarios.

2 PC COMPOSITE PADDLE

Our KAHUNA 2-piece composite paddle consists of a fiberglass matte finished shaft and rugged multiple front spline plastic blade. We added a rubber guard around the blade to not only protect your paddle but also your board. The 2-piece shaft offers infinite adjustment due to our KAHUNA power clip, the paddle ranges in length for paddlers height between 5’0” and 6’6”. Our plastic power V grip is ergonomically designed to fit comfortably in your hand. The KAHUNA 2-piece composite paddle is the best value on the market and great for multiple users!

For those shoulder-season days when it’s too warm for dry socks but wading into the water chills your toes, the 2 mm neoprene NRS Wetsocks offer added cushioning and the right amount of warmth. Perfect for wearing with sandals or wetshoes.

Product Details

A basic and affordable J-style kayak carrier by Malone Autoracks. Save space on your crossbars by carrying your kayak on its side in a J-cradle. Easy installation. All tie down straps included.

FEATURES

• Fits round, square & oval cross bars
• No tools required installation
• Corrosion-resistant steel frames
• Jawz universal mounting adapters
• 11′ cam buckle load straps
• 12′ bow & stern safety tie-downs
• Adjustable foam padding on cradles

• 100% Carbon shaft is lightweight, durable and reduces fatigue and joint strain
• Mid-sized, fiberglass reinforced blades allow for a smooth, flutter free forward stroke
• Snug fitting, snap-button ferrule allows for multiple feather angles

Shaft Material: 100% Carbon
Blade Material: abXII Fiberglass Reinforced Nylon
Blade Size: 6.25 x 18 in. (16 x 46 cm.)
Blade Surface Area: 91 sq. in. (587 sq. cm.)
Weight: 30.5 oz. (865 g)
Ferrule Angles: 0° & 60° (L or R)

In situations where being seen is a must, Adventure Lights sets unsurpassed standards. Adventure Lights Safety Lights are ultra-lightweight, reliable and bright visual identification products that have multiple applications in a wide variety of environments.

Closely modeled after the Eddy-Flex, the Eddy-Air has all the same great features with a few added touches. Two large front zippered pockets provide easy access to all your on the water gear and a high back mesh design that fits beautifully with most high back seats. The unisex styling, contoured fit, reflective trim, round edges and soft-foam construction all combine to make the Eddy-Air a step up in features and comfort.

Aquaseal UV is a quick-curing, clear-drying adhesive that bonds directly to neoprene, nylon, and GORE-TEX® fabrics. It dries instantly when exposed to sunlight or UV light. Waterproof, flexible and abrasion-resistant.